Monday, October 3, 2016

Introduction to Load Balancing with Nginx

What is Nginx?

Nginx is software to provide a web server. It can act as a reverse proxy server for TCP, UDP, HTTP, HTTPS, SMTP, POP3, and IMAP protocols, as well as a load balancer and an HTTP cache.

What is a reverse proxy?

All of you might have heard about what is a proxy server. It is a server which act as a intermediate server with internal network client and external network which is Internet. Proxy server requests contents on behalf of the internal client and once received the content they are being served to the internal client. 
Where as reverse proxy server acts the opposite. This server sits behind the firewall of the internal network and it forwards the requests which are received from external network or internet to internal web servers or application servers. So it can be considered as another security layer in the application's infrastructure. Nginx can be considered as a Reverse Proxy software.

What is load balancing?

Load balancing means distributing network or application traffic across a number of servers. Load balancing across multiple application instances is a commonly used technique for optimizing resource utilization, maximizing throughput, reducing latency, and ensuring fault-tolerant configurations.

What are the load balancing methods for Nginx?

The following load balancing mechanisms (or methods) are supported in nginx:

  • round-robin — requests to the application servers are distributed in a round-robin fashion,
  • least-connected — next request is assigned to the server with the least number of active connections,
  • ip-hash — a hash-function is used to determine what server should be selected for the next request (based on the client’s IP address). 


Default load balancing configuration

The simplest configuration for load balancing with nginx may look like the following:

http {
    upstream myapp1 {
        server srv1.example.com;
        server srv2.example.com;
        server srv3.example.com;
    }

    server {
        listen 80;

        location / {
            proxy_pass http://myapp1;
        }
    }
}

In the example above, there are 3 instances of the same application running on srv1-srv3. When the load balancing method is not specifically configured, it defaults to round-robin. All requests are proxied to the server group myapp1, and nginx applies HTTP load balancing to distribute the requests.
Reverse proxy implementation in nginx includes load balancing for HTTP, HTTPS, FastCGI, uwsgi, SCGI, and memcached.
To configure load balancing for HTTPS instead of HTTP, just use “https” as the protocol.
When setting up load balancing for FastCGI, uwsgi, SCGI, or memcached, use fastcgi_pass, uwsgi_pass,scgi_pass, and memcached_pass directives respectively.

Least connected load balancing

Another load balancing discipline is least-connected. Least-connected allows controlling the load on application instances more fairly in a situation when some of the requests take longer to complete.
With the least-connected load balancing, nginx will try not to overload a busy application server with excessive requests, distributing the new requests to a less busy server instead.
Least-connected load balancing in nginx is activated when the least_conn directive is used as part of the server group configuration:

    upstream myapp1 {
        least_conn;
        server srv1.example.com;
        server srv2.example.com;
        server srv3.example.com;
    }

Session persistence

Please note that with round-robin or least-connected load balancing, each subsequent client’s request can be potentially distributed to a different server. There is no guarantee that the same client will be always directed to the same server.
If there is the need to tie a client to a particular application server — in other words, make the client’s session “sticky” or “persistent” in terms of always trying to select a particular server — the ip-hash load balancing mechanism can be used.
With ip-hash, the client’s IP address is used as a hashing key to determine what server in a server group should be selected for the client’s requests. This method ensures that the requests from the same client will always be directed to the same server except when this server is unavailable.
To configure ip-hash load balancing, just add the ip_hash directive to the server (upstream) group configuration:

upstream myapp1 {
    ip_hash;
    server srv1.example.com;
    server srv2.example.com;
    server srv3.example.com;
}

Weighted load balancing

It is also possible to influence nginx load balancing algorithms even further by using server weights.
In the examples above, the server weights are not configured which means that all specified servers are treated as equally qualified for a particular load balancing method.
With the round-robin in particular it also means a more or less equal distribution of requests across the servers — provided there are enough requests, and when the requests are processed in a uniform manner and completed fast enough.
When the weight parameter is specified for a server, the weight is accounted as part of the load balancing decision.

    upstream myapp1 {
        server srv1.example.com weight=3;
        server srv2.example.com;
        server srv3.example.com;
    }

With this configuration, every 5 new requests will be distributed across the application instances as the following: 3 requests will be directed to srv1, one request will go to srv2, and another one — to srv3.
It is similarly possible to use weights with the least-connected and ip-hash load balancing in the recent versions of nginx.

Health checks

Reverse proxy implementation in nginx includes in-band (or passive) server health checks. If the response from a particular server fails with an error, nginx will mark this server as failed, and will try to avoid selecting this server for subsequent inbound requests for a while.
The max_fails directive sets the number of consecutive unsuccessful attempts to communicate with the server that should happen during fail_timeout. By default, max_fails is set to 1. When it is set to 0, health checks are disabled for this server. The fail_timeout parameter also defines how long the server will be marked as failed. After fail_timeout interval following the server failure, nginx will start to gracefully probe the server with the live client’s requests. If the probes have been successful, the server is marked as a live one.

Source : https://www.nginx.com/blog

No comments:

Post a Comment